Mud shale shaker operation |Mud Shale Shaker

Mud shale shaker operation

02/09/2024 Post No comments

Preparation for mud shale shaker operation

Wear labor protection supplies: Before operating the mud shale shaker, you must correctly wear labor protection supplies, such as gloves, masks, etc., to protect your own safety and avoid direct contact with mud.
Check the mud shale shaker status:
1. Check whether the screen is normal to ensure that there is no damage, wear and other conditions. If abnormal, should be replaced in time.
2. Check whether the motor is normal, pay attention to whether there is abnormal sound or overheating phenomenon. If there is a problem, it needs to be repaired in time.
3. Check whether the various parts of the vibrating screen are loose, and tighten them in time if they are loose.
4. Check whether the pipeline valve is opened or closed according to the process flow to ensure that the equipment is in the correct working condition.
5. Observe and check the sealing condition of the mud shaker screen to ensure that there is no leakage.
Confirm the safety conditions: ensure that there is no one, no tools or foreign bodies on the mud shale shaker to prevent accidents Operation procedure

China Mud shale shaker operation

Start the device:

1. Turn on the power switch of the drilling shale shaker and screen according to the set parameters.

2. During the starting process, pay attention to the motor rotation direction is correct, should be consistent with the direction marked on the belt cover.

Feed and adjust:

1. Evenly distribute the slurry sample to be tested on the shaker. o Adjust the vibration amplitude and frequency as needed to achieve the best screening results.

2. Adjust the size of the outlet valve according to the solid phase content of the slurry during operation. If the mud is too thick, the water spray valve can be opened for dilution.

Monitoring and adjustment:

1. During the screening process, the operation status of the mud shaker is continuously monitored to ensure the normal operation of the equipment.
2. If abnormal sound, vibration instability, etc., should be stopped in time for maintenance Post-operation processing mud shale shaker

Operation final work Shutdown and cleaning:

2. Clean the mud shaker and screen as necessary to prevent mud residue from affecting the next use. The screen surface can be washed with water to remove the viscosity and fine sand trapped on the screen surface.

Thanks for visiting our website. Please feel free to leave a message if you any questions.

Sales office：No.10 West of North 2nd Ring Road Xi’an City, Shaanxi Province.

Manufacture: No.2 Goods yard road Xianyang City, Shaanxi Province.

Tel：+86-29-86332919

Call：+86-18509252400

E-mail：sales@trsolidscontrol.com

Web:www.trsolidscontrol.com

www.solidscontrolequipment.com